over $250.00
Uses and Benefits of PREempt CS20 Sterilant High Level Disinfectant
PREempt™ CS20 is a sterilant and high-level disinfectant for tools and implements in 20 minutes. It is ready to use, and no dilution is required. It can be reused for up to 14 days in a soaking tray. It is ideal for use on professional stainless steel and hard plastic tools and implements.
Features of PREempt CS20 Sterilant and High Level Disinfectant:
- Health Canada registered sterilant and high level disinfectant
- Sterilizes tools in only 20 minutes
- Ready to use (no mixing or dilution required)
- Re-use for up to 14 days in a soaking tray
- Compatible with your professional stainless steel and hard plastic tools
- No special ventilation needed
- Leaves behind no toxic residues
- Powered by Accelerated Hydrogen Peroxide®
- Eco-friendly, biodegradable formula
High level disinfection is recommended for semi-critical tools or implements, that come in contact with mucous membranes or non-intact skin during use, but do not ordinarily penetrate the skin or enter normally sterile areas of the body. In personal service settings, this can include tools such as reusable foot files, tweezers used for ingrown hairs, microblade handles, nail clippers and cuticle pushers, or needle holders.
Health Canada is responsible for oversight of high-level disinfectant label claims and has approved the re-use of PREempt™ CS20 for 14 days. Exceptions to this allowance occur if the solution is visibly soiled, or if the indicator strip fails to produce the required measurement. In these cases, the solution should be discarded even if the 14-day period has not yet been reached.
Directions for Use
Follow specific disinfection directions depending on the disinfection and sterilization needs for each instrument.
Before Use
- Ensure that the instrument, equipment, or device material to be disinfected is compatible
- Compatible materials include acrylic, silicone rubber, high-density plastics, and stainless steel
- Not compatible with copper, brass, carbon tipped devices, and anodized aluminum
Check the full list of compatible/non-compatible materials on the Virox website if you are not sure.
High Level Disinfection
- Place pre-cleaned, rinsed and dried medical devices and instruments in solution of undiluted PREempt CS20
- Allow devices to soak for at least 20 minutes
- Remove and rinse with sterile water, or potable tap water
Sterilization
- Place pre-cleaned, rinsed and dried medical devices and instruments in solution of undiluted PREempt CS20
- Do not dillute
- DO NOT soak tools overnight
- Remove and rinse with sterile water
Reuse Period of Disinfection
- The use-life of this product can be verified by using a 2% AHP test strip.
- PREempt CS20 solution may be used and reused for up to a MAXIMUM of 14 days provided a 2% AHP test strip indicates a pass according to the instructions.
Active ingredient
- Hydrogen peroxide 7%
Safety information:
- Keep out of reach of children
- May cause burns
- Avoid contact with eyes and skin
- Wear suitable protective clothing
- Storage: Store in a dry, well-ventilated area away from chemicals, direct light, heat, and open flame
- Read all labels carefully before using this product
Please refer to the label for a full list of precautions and contact times.
Safety Data Sheet (SDS) for PREempt CS20